Entraides et échanges autour de la technologie Scol - Informations and exchanges on the Scol technology
Vous pouvez changer la langue de l'interface une fois inscrit - You can change the language once registered
You are not logged in.
Pages: 1
Hi all, why the object doesn't appear when I played? Whereas I have been set my project like this:
First, I put AR capture --> I set the resolution: 320 x 240 (based on my webcam resolution)
Second, I put AR marker --> I choose marker #1
Then, I added the resources to the scene.
I added the mesh --> Sphere.mesh
Then, I added dummy --> I give the name: earth_dummy
After that, I maked the .mesh object as child from earth_dummy.
Then, I set on AR marker --> object name: I selected earth_dummy, OK.
I also set scale and position on .mesh object --> scale X,Y, and Z = 0.01 each one and position=0.05
and then I print out the marker #1,
And then I played and pointed the webcam to my marker.
The result is --> my object doesn't appeared!
-------------
Can you explain and solve this problem?
Thankyou!
Offline
Hi !
If you can, try with an another webcam
otherwise enable the marker infos in AR capture to see if the marker is detected
if the marker is shown correctly it must still a scale problem
be sure to keep a white border large enough around the marker
try the example ar piano with your webcam to see if it works
if nothing of this wroks send me your scene example so I could try and see what append
Offline
OK Arkeon, but maybe I can't try using another webcam for a while.
But, I have been check 'Show marker info' and when I played, the marker was detected correctly --> the id number appeared.
I also have been try the project 'AR piano' on my webcam (resolution: 320 x 240) and it works!
this is my project, maybe you can try at your pc:
project-earth
thankyou.
Offline
there is no XOS file ?
your model works fine for me.
be sure to track the dummy, scale the sphere to reduce it's size to correspond to the marker
and try different marker size parameter
Offline
Pages: 1